Cleaning Tips

Suggested Dilution Ratio for Release Ultra Concentrate by industry and soil

Here are just a few cleaning scenarios our customers have found Release is amazing at

Aviation

An airplanes leading edge

  1. If there are bugs, use Release in a 1:20 dilution. If general dirt/dust, use a 1:40 dilution. Apply and let sit for 2-3 minutes. Lightly reapply in the 2-3 minutes if drying fast.
  2. Use a soft microfiber cloth and wipe Release and the soils off the leading edge. Some agitation may be required if the bugs have been on the surface for a long period of time.
  3. Once your soil is off, wipe one last time with a new clean cloth to ensure no Release is left on the surface for a clean and bright shine.

Belly of an airplane

  1. If caked on exhaust or grease, use Release 1:20 dilution. Soak and let sit for 3-5 minutes. Agitation will be required for thick grease/exhaust build up. Utilize a lightly used rag first to wipe the bulk of the grime off.
  2. Apply Release 1:40 dilution and wipe the remainder of the soil off.
  3. Once your soil is off, wipe one last time with a new clean cloth to ensure no Release is left on the surface for a clean aircraft belly.

Airplane windscreen/windows

  1. Use Release 1:100 dilution. Lightly spray on Release and let sit for 1-2 minutes if bugs are present.
  2. Use a clean soft microfiber cloth and gently wipe Release and the soils off the surface. Wipe in the direction of the airflow applying gentle pressure. Do not use a cloth you've used on other areas of the plane. Never wipe in circles on an airplane windscreen, this will cause scratching. Multiple applications may be required to get old bugs or other heavy soils off at this dilution.
  3. Once your soil is off, gently wipe with the airflow one last time with a new clean cloth to ensure no Release is left on the surface for a clean aircraft windscreen/windows.

Interior leather, dash, and trim

  1. Use Release between a dilution of 1:40 and 1:100. Lightly spray on Release and let sit for 30 seconds.
  2. Use a clean soft microfiber cloth and wipe Release and the soils off the surface. Do not use a cloth you've used on other areas of the plane as it will spread dirt into your interior. Gently agitate ridged surfaces to help Release associate with the soil.
  3. Once your soil is off, gently wipe one last time with a clean cloth to ensure no soil or Release is left on the surface for a clean interior.

Bugs on an airplane

  1. Use Release in a 1:20 dilution. If bugs are fresh, you can use a 40:1 dilution. Apply and let sit for 1-2 minutes. Lightly reapply in the 1-2 minutes if drying fast.
  2. Use a soft microfiber cloth and wipe Release and the soils off the surface. Some agitation may be required if the bugs have been on the surface for a long period of time.
  3. Once your soil is off, wipe one last time with a new clean cloth to ensure no Release is left on the surface for a clean and bright shine.

Top and bottom of wings, engine cowling, doors, tail, and horizontal stabilizers

  1. Use Release in a 1:40 dilution for general cleaning of dust and dirt. Apply and let sit for approx. 1 minute.
  2. Use a soft microfiber cloth and wipe Release and the soils off the surface. Some agitation may be required if the soils have been on the surface for a long period of time.
  3. Once your soil is off, wipe one last time with a new clean cloth to ensure no Release is left on the surface for a clean and bright shine.

Don't know how to dilute Release Ultra? See our F.A.Q's. 

Automotive

Windows / Mirrors

  1. Use Release 1:100 dilution. Lightly spray on Release and let sit for 1-2 minutes if bugs are present.
  2. Use a clean soft microfiber cloth and gently wipe Release and the soils off the surface. Do not use a cloth you've used on other areas of the car or truck. Multiple applications may be required to get old bugs or other heavy soils off at this dilution.
  3. Once your soil is off, gently wipe one last time with a new clean cloth to ensure no Release is left on the surface for a clean car or truck.

Bugs on the front of your vehicle

  1. Use Release in a 1:20 dilution. If bugs are fresh, you can use a 1:40 dilution. Apply and let sit for 1-2 minutes. Lightly reapply in the 1-2 minutes if drying fast.
  2. Use a soft microfiber cloth and wipe Release and the soils off the surface. Some agitation may be required if the bugs have been on the surface for a long period of time.
  3. Once your soil is off, wipe one last time with a new clean cloth to ensure no Release is left on the surface for a clean and bright shine.

Brake Dust on wheels/rims.

  1. Use Release 1:20 dilution. Soak and let sit for 2-3 minutes. Agitation will be required for thick brake dust build-up to help Release associate with the dust from within. Utilize a lightly used rag first to wipe the bulk of the brake dust off.
  2. Apply Release 1:40 dilution and wipe the remainder of the brake dust off.
  3. Once your soil is off, wipe one last time with a new clean cloth to ensure no Release is left on the surface for a clean and shiny rim. Release can also be rinsed off.

Interior leather, cloth, dash, floor mats, and trim

  1. Use Release between a dilution of 1:40 and 1:100. Lightly spray on Release and let sit for 30 seconds.
  2. Use a clean soft microfiber cloth and wipe Release and the soils off the surface. Do not use a cloth you've used on other areas of the car as it will spread dirt into your interior. Gently agitate ridged surfaces to help Release associate with the soil.
  3. Once your soil is off, gently wipe one last time with a clean cloth to ensure no soil or Release is left on the surface for a clean interior.

Carpet/Upholstery Cleaning

  1. Use Release 1:20 dilution. Soak and let sit for 2-3 minutes. Agitation may be required for built-up soils to help Release associate with the soil from within.
  2. Use a carpet cleaner/extractor to lift Release and the soil out of the carpet, fabric, or upholstery.
  3. Let the surface dry before use. Enjoy a clean surface with no hint of fragrance or chemical smell.

Home Use

House Windows

  1. Use Release 1:100 dilution. Lightly spray on Release and let sit for approx.. 20 seconds.
  2. Use a clean soft microfiber cloth or paper towel and gently wipe Release and the soils off the glass. Do not use a cloth you've used on other areas of the house. Multiple applications may be required to get heavy soils off at this dilution.
  3. Once your soil is off, gently wipe one last time with a new clean cloth to ensure no Release is left on the surface for a clean view.

Greasy Stovetop/Surface

  1. Use Release 1:20 dilution. Fully saturate the area and spray on Release and let sit for approx.. 90 seconds.
  2. For thicker grease, agitate Release into the soil by using a brush or cloth. This helps Release associate with the grease from within.
  3. Use a clean microfiber cloth or paper towel and wipe Release and the soil off the surface. Multiple applications may be required to get heavy grease off.
  4. Once your soil is off, gently wipe one last time with a new clean cloth to ensure that the soil and Release are off the surface for a clean view and a job well done.

Mold/Mildew in the bathroom

  1. Use Release in a 1:20 to 1:40 dilution depending on the severity for general cleaning of dust, dirt, mold and mildew. Saturate the surface and let sit for approx. 1 minute.
  2. Use a soft microfiber cloth and wipe Release and the soils off the surface. Some agitation may be required if the soils have been on the surface for a long period.
  3. Once your soil is off, wipe one last time with a new clean cloth to ensure no Release or soil is left on the surface.

Don't know how to dilute Release Ultra? See our F.A.Q's. 

Marine

Windows / Mirrors

  1. Use Release 1:100 dilution. Lightly spray on Release and let sit for 1-2 minutes if bugs are present.
  2. Use a clean soft microfiber cloth and gently wipe Release and the soils off the surface. Do not use a cloth you've used on other areas of the car or truck. Multiple applications may be required to get old bugs or other heavy soils off at this dilution.
  3. Once your soil is off, gently wipe one last time with a new clean cloth to ensure no Release is left on the surface for a clean car or truck.

Bugs on the bow

  1. Use Release in a 1:20 dilution. If bugs are fresh, you can use a 1:40 dilution. Apply and let sit for 1-2 minutes. Lightly reapply in the 1-2 minutes if drying fast.
  2. Use a soft microfiber cloth and wipe Release and the soils off the surface. Some agitation may be required if the bugs have been on the surface for a long period of time.
  3. Once your soil is off, wipe one last time with a new clean cloth to ensure no Release is left on the surface for a clean and bright shine.

Interior or exterior leather or vinyl seat coverings

  1. Use Release in a 1:40 dilution for general cleaning of dust, dirt, mold and mildew. Saturate the surface and let sit for approx. 1 minute.
  2. Use a soft microfiber cloth and wipe Release and the soils off the surface. Some agitation may be required if the soils have been on the surface for a long period.
  3. Once your soil is off, wipe one last time with a new clean cloth to ensure no Release or soil is left on the surface.

RVs and Campers

Windows / Mirrors

  1. Use Release 1:100 dilution. Lightly spray on Release and let sit for 1-2 minutes if bugs are present.
  2. Use a clean soft microfiber cloth or paper towel and gently wipe Release and the soil off the surface. Do not use a cloth you've used on other areas of the car or truck. Multiple applications may be required to get old bugs or other heavy soils off at this dilution.
  3. Once your soil is off, gently wipe one last time with a new clean cloth to ensure no Release or soils are left on the surface.

RV/Camper Roof

  1. Use Release 1:20 dilution. Spray or foam onto your RVs roof. Brush or agitate Release on the surface to help it associate from within the soil like tree sap and dirt.
  2. Soak and let sit for 2-3 minutes. Rinse with a hose or wipe off using a clean dry microfiber cloth.
  3. Note: Use safety devices and use extra caution when climbing onto a high surface.

Interior Leather

  1. Use Release in a 1:40 dilution for general cleaning of dust and dirt. Apply and let sit for approx. 1 minute.
  2. Use a soft microfiber cloth and wipe Release and the soils off the surface. Some agitation may be required if the soils have been on the surface for a long period of time.
  3. Once your soil is off, wipe one last time with a new clean cloth to ensure no Release or soil is left on the surface.

Bugs on the front

  1. Use Release in a 1:20 dilution. If bugs are fresh, you can use a 1:40 dilution. Apply and let sit for 1-2 minutes. Lightly reapply in the 1-2 minutes if drying fast.
  2. Use a soft microfiber cloth or rinse with water and wipe Release and the soils off the surface. Some agitation may be required if the bugs have been on the surface for a long period of time.
  3. Once your soil is off, wipe one last time with a new clean cloth to ensure no Release is left on the surface for a clean and bright shine.

RV/Camper Awning Cleaning

  1. Use Release 1:20 dilution. Fully saturate the area and spray on Release and let sit for approx.. 90 seconds.
  2. During the sit time, agitate or brush the area to help Release associate with mildew and dirt from within.
  3. Use a clean microfiber cloth, or paper towel and wipe Release and the soil off the surface. You can also rinse Release off with a hose or pressure washer.
  4. Multiple applications may be required to remove staining or discoloration from old soils. You're going to be amazed by the clean awning and a job well done.

Don't know how to dilute Release Ultra? See our F.A.Q's. 

Industrial

Grease / Oil on surface

  1. For oil or grease, use Release 1:20 dilution. Soak and let sit for 3-5 minutes. Agitation will be required for thick grease/oil build up. Utilize a lightly used rag first to wipe the bulk of the grime off.
  2. Apply Release 1:40 dilution and wipe the remainder of the soil off.
  3. Once your soil is off, wipe one last time with a new clean cloth to ensure no Release is left on the surface.

Don't know how to dilute Release Ultra? See our F.A.Q's. 

Have a cleaning scenario not mentioned here? Ask one of our helpful support team members!

Our support team loves a challange and is ready to help you find the right dilution ratio, cleaning method, and sit time to tackle your cleaning task. Email us anytime at info@syquestusa.com or submit a form on our Contact Us page.